Resetting The Trip Section Counter To Zero; Resetting Trip Data After The Trip - VDO M3WL User Manual

M3 WL

Resetting the trip section counter to zero

To reset the counter either the section time or the
section distance must be shown on the display.
Press and hold the BIKE button.
The text Trip Section RESET appears on the display.
If you continue to hold down the BIKE button,
the trip section data is now reset to zero.
The following data is reset to zero:
– Section distance
– Section ride time

Resetting trip data after the trip

After each trip, you can reset the data for this trip to zero.
The VDO M3 WL is then ready for the next trip.
ATTENTION: your total distance (total number of kilometres/
miles ridden) and total ride time are not reset to zero.
How to reset the trip data:
Press and hold the BIKE button for a few seconds.
The text Tour Data RESET appears on the display.
If you continue to hold down the BIKE button,
the trip data is now reset to zero.
The following data is reset to zero:
– Distance
– Ride time
– Average speed
– Maximum speed
34