Reset Functions; Terms Of Guarantee - VDO X1DW Instruction Manual

GB SLO PL JP

5.8 Reset functions

You use the RESET function to set any of these back
TOUR DATA
B
ODO TOTAL
B
With the respective reset modes, the following
information is deleted:
TOUR DATA: Day's tripdistance, ride time,
B
average speed, max. speed, cadence (option)
ODO TOTAL: Total km, km bike 1, km bike 2
B
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
18 X1DW
Using go to DATA RESET/
SELECT. Confirm with M .
Use to go to the data you
want to reset:
DATA RESET/TOUR DATA
B
OR
DATA RESET/ODO TOTAL
B
Confirm your selection with
Query: SELECTED DATA/RESET?
ATTENTION: This step cannot be reversed.
Only confirm with M , if you want to delete the
selected data. The display confirms:
DATA RESET/RESET DONE.
Automatic return to SETTINGS/SELECT.
VDO CYCLECOMPUTING

6. Terms of guarantee

VDO Cycle Parts grants a guarantee of 5 years
from the date of purchase for your VDO computer.
The guarantee covers material and processing de-
fects on the computer itself, on the sensor/trans-
mitter and on the handlebar holder. Cables and
batteries as well as assembly materials are excluded
from the guarantee. The guarantee is only valid
if the parts concerned have not been opened
(exception: battery compartment on the compu-
ter), no force has been used and there is
no sign of wilful damage.
Please take care to keep the receipt as it must
M . be presented in the event of a complaint.
If the complaint is justified, you will receive a
comparable replacement appliance from us.
You are not entitled to an identical replacement
model if the model in question is no longer in
production due to a change of model.
www.vdocyclecomputing.com
JP PL SLO
Please contact the dealer from whom you
purchased the device for all complaints and
guarantee claims. Or send your complaint
directly to:
Cycle Parts GmbH
Große Ahlmühle 33
D-76865 Rohrbach (Germany)
We would be pleased to answer any technical
questions you might have at the following
hotline number:
+49 (0) 63 49 - 96 35 - 10.
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in
the course of further development.
X1DW
GB
19