Displaying Stored Error Information - Webasto SmartControl Operating Instructions Manual

Turn the control knob in order to switch between the names
X X
of the heater and information regarding control element
(the name of the control element, status of software and
equipment).
9.12

Displaying stored error information

If heaters and other connected components show malfunctioning then such error
information codes) is saved and displayed here. Current error information is additionally
marked with "!" symbol.
When an error occurs, error information must be confirmed by pressing the control
knob. The main menu is displayed once again only after confirmation.
3
The menu element "Settings" has been chosen.
Turn the control knob in order to choose menu element
X X
"Error message".
Press the control knob in order to confirm selection.
X X
Error message(s) is (are) shown in the display. If there is no
error message then "OK" appears in the display. If there are
more error messages then all the messages can be displayed by
turning the control knob.
Press the control knob in order to return to menu element.
X X
Settings
Settings
Error
information
Settings
28