Displaying The System Information - Webasto SmartControl Operating Instructions Manual

Turn the control knob in order to choose the desired hour
X X
for end of day.
Press the control knob in order to confirm selection.
X X
Time of a minute for the end of the day flickers in the display.
"Day" brightness level appears in the display.
Turn the control knob in order to choose the desired bright-
X X
ness level "day".
Press the control knob in order to confirm selection.
X X
"Night" brightness level appears in the display.
Turn the control knob in order to choose the desired bright-
X X
ness level "night".
Press the control knob in order to confirm selection.
X X
"Day/night" brightness level appears in the display.
The selected values have been saved.
9.11

Displaying the system information

There are data in the system information regarding software status and control element
status and the name of the connected heater.
3
The menu element "Settings" has been chosen.
Turn the control knob in order to choose menu element
X X
"System information".
Press the control knob in order to confirm selection.
X X
The heater name is shown in the display.
Setting the minutes for end of day is done in the
same way as the hours for end of day.
Settings
End of daytime
Settings
Brightness
(Day)
Settings
Brightness
(Night)
Settings
Day/Night
Settings
System
information
Settings
Heater
27