Machine Setting - Konica Minolta bizhub 160f Service Manual

9. Utility Mode (bizhub 160/bizhub 161)
9.2.4

MACHINE SETTING

• Various settings for the machine's operating environment can be specified.
A. AUTO PANEL RESET
Functions / Use • To specify the time until the auto panel reset operation is performed after a copy
Setting/Procedure • The default setting is "1" minute.
B. ENERGY SAVE MODE
Functions / Use • To specify the time until the machine enters Energy Save mode after a copy
Setting/Procedure • The default setting is "15" minutes.
C. DENSITY (ADF)
Functions / Use • To specify the scanning density when using the Automatic Document Feeder.
NOTE
• In order to reduce the appearance of spots in copies, the Automatic Docu-
Setting/Procedure • The default setting is "MODE1."
D. DENSITY (BOOK)
Functions / Use • To specify the scanning density when using the Original Glass.
Setting/Procedure • The default setting is "MODE1."
E. PRINT DENSITY
Functions / Use • To specify the default print density.
Setting/Procedure • The default setting is "0."
F. LCD CONTRAST
Functions / Use • To specify the brightness of the display.
Setting/Procedure • The default setting is "0."
66
cycle has been completed or after the last key operation.
OFF
ON : 0.5 "1"
cycle has been completed or after the last key operation.
ment Feeder density level is set for lighter copies as a default.
"MODE 1" : For a lighter copy density in order to reduce the appearance
of spots in copies
MODE 2 : For printing copies with the same density as the document
"MODE 1" : For printing copies with the same density as the document
MODE 2 : For a lighter copy density in order to reduce the appearance
of spots in copies
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
2 3 4 5 (min)
"15" min (1 to 240)
"0" (-3 to +3)
"0" (-1 to +2)