Copy Setting - Konica Minolta bizhub 160f Service Manual

10. Utility Mode (bizhub 160f/bizhub 161f)
10.2.8

COPY SETTING

• The default settings for each copy function can be specified.
A. PAPER PRIORITY
Functions / Use • To specify the paper tray that is given priority.
Setting/Procedure • The default setting is "TRAY1."
B. DENSITY PRIORITY
Functions / Use • To specify the image density setting that is selected when the machine is turned
Setting/Procedure • The default setting is "AUTO."
C. DENSITY LEVEL (A)
Functions / Use • To specify the default density level when the Auto setting is selected.
Setting/Procedure • The default setting is NORMAL "0."
D. DENSITY LEVEL (M)
Functions / Use • To specify the default density level when manually setting the image density.
Setting/Procedure • The default setting is NORMAL "0."
E. OUTPUT PRIORITY
Functions / Use • To specify the default finishing setting.
Setting/Procedure • The default setting is "NON."
F. RESOLUTION
Functions / Use • To specify the scanning resolution.
Setting/Procedure • The default setting is "600×300."
80
"TRAY1"
on or the Panel Reset key is pressed.
"AUTO"
"NON"
"600×300"
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
TRAY2
MANUAL PHOTO
"0" (-1 to +1)
"0" (-4 to +4)
SORT
600×600