Rx Operation - Konica Minolta bizhub 160f Service Manual

Field Service Ver. 1.0 Apr. 2005
10.2.11

RX OPERATION

• From the RX OPERATION menu, various functions for receiving faxes can be set.
A. MEMORY RX MODE
Functions / Use • This function can be used to set whether to allow ("ON") memory reception or
Setting/Procedure • The default setting is "OFF."
B. No. of RINGS
Functions / Use • This function can be used to set the number of rings between 1 and 16 until the
Setting/Procedure • The default setting is "2" (marketing area: standard).
• Depend on soft switch setting of marketing area.
NOTE
• A fax to be received is cancelled and the machine becomes unable to
☞
Confidential – for internal use only, do not distribute
not ("OFF"). In cases when confidential faxes are being received, the received
document can be stored in the memory and printed at a specified time or when
memory reception is set to "OFF." A password can be set to specify the starting
time or ending time of memory reception, or to cancel the function.The set start-
ing time and ending time are valid every day until memory reception is turned off.
ON : Enable memory RX mode
"OFF" : Disable memory RX mode
call is answered.
1 : Once "2" : Twice
5 : 5 times 6 : 6 times
9 : 9 times 10 : 10 times
13 : 13 times 14 : 14 times
receive it if the setting of "No. of RINGS" is made longer than the setting
of "CNG duration after dialing."
Be sure to make the "No. of RINGS" setting to a value shorter than the
"CNG duration after dialing" setting.
199 : SOFT SWITCH/ #21/ Bit No. 6-7: CNG duration after dialing
10. Utility Mode (bizhub 160f/bizhub 161f)
3 : 3 times
7 : 7 times
11 : 11 times 12 : 12 times
15 : 15 times 16 : 16 times
4 : 4 times
8 : 8 times
85