Konica Minolta bizhub 160f Service Manual page 195

14. Board Switch
No. Key Name
7 10-Key Pad
8 Scan key
9 Fax key
10 Copy key
11 Stop key
12 Panel Reset key
13 123/ ABC key
14 Start key
▲/ ▼ key
15
16 Zoom key
17 Paper key
18 < / > key
19 Auto/ Photo key
20 Sort key
21 2in1 key
22 Status key
23 Memory TX lamp
24 Auto RX lamp
25 Resolution key
26 Speaker key
27 Phone Book key
162
Use to enter the number of copies to be made and any
other numeric data.
Use to enter text such as a name.
Press to enter Scan mode. The indicator lights up in green
to indicate that the machine is in Scan mode.
(Available only when the Internet Fax & Network Scan Kit is
installed.)
Press to enter Fax mode. The indicator lights up in green to
indicate that the machine is in Fax mode.
Press to enter Copy mode. The indicator lights up in green
to indicate that the machine is in Copy mode.
• Press to stop a print cycle.
• Press to stop a scanning sequence.
• The indicator flashes in orange when the machine is
brought to a pause or in a print cycle.
Press to reset all print functions and settings to their
defaults.
Press to switch the function of the10-Key Pad between typ-
ing in numbers and typing in letters.
• Press to start a scanning or print cycle.
• Press to specify the various settings.
• The indicator lights up in green when the machine can
accept print jobs.
• Press to change the zoom ratio in the range between ×
0.25 and × 4.00 in × 0.01 increments.
• Press to scan through the various settings and informa-
tion, in order.
• Press to specify the various settings.
Press to select a zoom ratio from among those fixed ratios
available as standard.
Press to select the paper tray that contains the desired
paper.
• Press to adjust the image density.
• Press to specify the various settings.
Press to change the image density mode.
Press to select the sort function.
Press to select the 2in1 function.
Press to view the counters and transmission results. In
addition, the list of settings specified for each function and
the reports can be printed.
Lights up when the memory transmission function is
selected.
Lights up when the automatic reception function is
selected.
Use to select the image quality (transmission resolution).
• Press to answer the call.
• Press again to hang up.
Use to display the information programmed for one-touch
dialing, group dialing and speed dialing.
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
Function