Konica Minolta bizhub 160f Service Manual page 163

13. Service Mode (bizhub 160f/bizhub 161f)
I. TX LEVEL
Functions/Use • PSK/FSK signal output level.
Setting/Procedure • The default setting is "-9 dBm."
J. RX LEVEL
Functions/Use • Reception sensitivity level.
Setting/Procedure • The default setting is "-43 dBm."
K. DTMF LEVEL
Functions/Use • Dual tone output level.
Setting/Procedure • The default setting is "-9 dBm."
L. CNG LEVEL
Functions/Use • Calling tone output level.
Setting/Procedure • The default setting is "-11 dBm."
M. CED LEVEL
Functions/Use • Answer tone output level.
Setting/Procedure • The default setting is "-11 dBm."
N. ECM MODE
Functions/Use • Select error correction mode.
Setting/Procedure • The default setting is "ON."
O. CODING SCHEME
Functions/Use • Select compression method in TX/ RX mode.
Setting/Procedure • The default setting is "JBIG."
• Select compression method in TX/ RX mode.
130
-2 dBm -3 to -8 dBm
-36 dBm -37 to -42 dBm
-2 dBm -3 to -8 dBm
-2 dBm -3 to -10 dBm
-2 dBm -3 to -10 dBm
"ON" : When an error occurs during communication, re-send the frame
where the error occurs.
OFF : Any error is ignored during communication.
"JBIG" : The most complex compression method that generates the
smallest code than any of following ones.
MMR : A compression method.
MR : A compression method.
MH : The simplest compression method.
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005
"-9 dBm" -10 to -16 dBm
"-43 dBm" -44 to -48 dBm
"-9 dBm" -10 to -16 dBm
"-11 dBm" -12 to -16 dBm
"-11 dBm" -12 to -16 dBm
-17 dBm
-49 dBm
-17 dBm
-17 dBm
-17 dBm