Network Setting - Konica Minolta bizhub 160f Service Manual

Field Service Ver. 1.0 Apr. 2005
F. RESOLUTION
Functions / Use • To specify the scanning resolution.
Setting/Procedure • The default setting is "600×300."
9.2.8

NETWORK SETTING

• Depending on the network environment in which the machine is located, there may be
some restrictions on the network functions that the machine can use. Make the network
settings to suit the functions and environment required for customer's location. The net-
work settings can be specified from the control panel or using the administrator mode of
Page Scope Web Connection.
A. IP ADDRESS
Functions / Use • This function is used to specify the IP address for the copier.
NOTE
• Available only if the NIC NC-501 is installed.
• Please consult customer's network administrator for information about
Setting/Procedure • The default setting is "AUTO."
• If AUTO is selected, the IP address is automatically acquired from the DHCP
NOTE
• AUTO is only enabled if there is a DHCP server available on the network.
• When IP address cannot be acquired from the DHCP server, IP address is
• When AUTO is selected, there is no need to set the subnet mask or gate-
• Select this option from the "TCP/IP Configuration" menu on the "Network"
• If SPECIFY is selected, the screen for entering the IP address appears.
B. SUBNET MASK
Functions / Use • This function is used to specify the subnet mask value for the network.
NOTE
• Available only if the NIC NC-501 is installed.
• Please consult customer's network administrator for information about
Setting/Procedure • Setting LAN connect to WAN the net mask address.
NOTE
• If Auto is selected for "1 IP Address/Auto," the items of "2 Subnet mask"
Confidential – for internal use only, do not distribute
"600×300"
the IP address to use.
"AUTO"
server.
acquired by the "Auto-IP function."
way setting. When using a fixed IP address, IP Address in NVRAM must be
selected for Page Scope Web Connection.
tab.
the subnet mask to use.
and "3 Gateway" are automatically set. Key entry is therefore disabled for
"2 Subnet mask" and "3 Gateway."
9. Utility Mode (bizhub 160/bizhub 161)
600×600
SPECIFY
69