Field Service Ver. 1.0 Apr. 2005
6.3.2
Removal of Circuit Boards and Other Electrical Components
NOTE
• When removing a circuit board or other electric component, refer to the precau-
tions for handling PWBs and follow the corresponding removal procedures.
• The removal procedures given in the following paragraphs omit the removal of the
component in question from a connector or a PWB support.
• Where it is absolutely necessary to touch the ICs and other electric components
on the board, be sure to ground your body.
Confidential – for internal use only, do not distribute
PWB-O
PWB-P
HV1
PU1
4980D025AC
PWB-PCL
PWB-NIC
PWB-NCU
PWB-IF
NIC-IF
6. Other
4980D064AC
33