9. Utility Mode (bizhub 160/bizhub 161)
C. GATEWAY
Functions / Use
• This function is used to specify the default gateway (IP address) of a router on
NOTE
• Available only if the NIC NC-501 is installed.
• Please consult customer's network administrator for information about
Setting/Procedure • Setting LAN address.
NOTE
• If Auto is selected for "1 IP Address/Auto," the items of "2 Subnet mask"
70
the network.
the gateway to use.
and "3 Gateway" are automatically set. Key entry is therefore disabled for
"2 Subnet mask" and "3 Gateway."
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Apr. 2005