Standard Message Stamp - Aficio 3235C Operating Instructions Manual

Other Transmission Features
F F F F
Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page], and then press
[OK].
The selected original position and
4
p age opening orientation are
shown above the highlighted [2
Sided Original].
Note
❒ To cancel this mode, press [Can-
cel]. The display returns to that
of step
❒ Select [2 Sided from 1st Page] to
send a two-sided original from
the first page.
❒ Select [1 Sided for 1st Page] if you
want to send a cover letter as the
first page.
G G G G
Press [OK].
H H H H
Specify the destination, and then
press the { { { { Start} } } } key.
64
C
.

Standard Message Stamp

Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: "Confidential", "Urgent",
"Please phone", and "Copy to corres
..."
You can also program other messages.
Note
❒ While this function is in use, the
third line of the Label Insertion is
not printed. See p.75 "Program-
ming the Label Insertion".
❒ When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
❒ To program a standard message,
use the Program / Change / De-
lete Standard Message function.
See p.157 "Programming, Chang-
ing, and Deleting Standard Mes-
sages".
A A A A
Place the originals, and the select
the scan settings you require.
Reference
p.11 "Placing Originals", Fac-
simile Reference <Basic Features>
p.28 "Scan Settings", Facsimile
Reference <Basic Features>
B B B B
Press [Sub TX Mode].
C C C C
Press [Std. Message].