Access Control - Aficio 3235C Operating Instructions Manual

Enhanced Network Security
E E E E
Press [Invalid] for the protocol you want to disable.
F F F F
Press [OK].
G G G G
Press the { { { { User Tools/Counter} } } } key.
Reference
Advanced network settings can be specified using Web Image Monitor.
For details, see the Web Image Monitor Help.
4

Access Control

This can be specified by the network administrator.
The machine can control TCP/IP access.
Limit the IP addresses from which access is possible by specifying the access
control range.
For example, if you specify the access control range as [192.168.15.16]-
[192.168.15.20], the client PC addresses from which access is possible will be from
192.168.15.16 to 192.168.15.20.
Limitation
❒ Using access control, you can limit access involving lpd, rcp/rsh, ftp, diprint,
ipp, Web Image Monitor, SmartDeviceMonitor for Client or DeskTopBinder.
You cannot limit the Monitoring of SmartDeviceMonitor for Client.
❒ You cannot limit access involving telnet, or SmartDeviceMonitor for Admin.
A A A A
Open a Web browser.
B B B B
Enter "http://(machine's-address)/" in the address bar to access the ma-
chine.
C C C C
Log onto the machine.
The network administrator can log on using the appropriate login user name
and login password.
D D D D
Click [Configuration], click [Security], and then click [Access Control].
The [Access Control] page appears.
E E E E
In [Access Control Range], enter the IP addresses from which access to the ma-
chine is permitted.
38