Changing The Port Settings For Smartdevicemonitor For Client - Aficio 3235C Operating Instructions Manual

Preparing the Machine

Changing the Port Settings for SmartDeviceMonitor for Client

Follow the procedure below to change the SmartDeviceMonitor for Client set-
tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
Note
❒ There are no settings for NetBEUI protocol.
2
Windows 95/98:
A A A A
Open [Printers] window from [Start] menu. .
B B B B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C C C C
Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
Windows 2000 / Windows NT 4.0:
A A A A
Open [Printers] window from [Start] menu. .
B B B B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C C C C
On the [Ports] tab, click [Configure Port].
The [Port Settings] dialog box appears.
32