Other Transmission Features
On Hook Dial
The On Hook Dial function allows
you to dial while hearing tone from
the internal speaker. You can send a
fax checking the connection.
Limitation
❒ This function is not available for
the optional extra G3 interface
unit, Internet Fax and IP-Fax.
Note
❒ This function is unavailable in some
4
countries.
❒ If an Immediate TX Result Report
(Immediate Transmission) is print-
ed, On Hook Dial transmission re-
sults are not mentioned on the
report.
A A A A
Place the original, and then select
the scan settings you require.
Reference
p.11 "Placing Originals", Fac-
simile Reference <Basic Features>
p.28 "Scan Settings", Facsimile
Reference <Basic Features>
B B B B
Press the { { { { On Hook Dial} } } } key.
You will hear a low tone from the
internal speaker.
56
Note
❒ If you want to cancel this oper-
ation, press the { { { { On Hook Dial} } } }
key again.
C C C C
Dial.
The machine immediately dials the
destination.
Note
❒ You can adjust the volume of
the On-hook sound by pressing
[Higher] or [Lower] in the upper
right-hand corner of the dis-
play. The volume can also be
preprogrammed in "General
Settings and Adjustments". See
p.79 "Adjusting the Volume",
Facsimile Reference <Basic Fea-
tures> and p.144 "General Set-
tings/Adjustment".
❒ If you make a mistake, press the
{ { { { On Hook Dial} } } } or { { { { Clear Modes} } } }
key, and then return to step
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key.
The transmission starts.
Note
❒ After transmission, the machine
returns to standby mode.
❒ If you want to cancel a transmis-
sion, press the { { { { Clear/Stop} } } } key,
and then remove the originals.
B
.