Base Screen - Sharp MX-M350 Service Manual

5. BASE SCREEN

To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then select the desired mode with the [MODE
SWITCH] key.
If you have set the display to show the address book screen when the [IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS]
key in the address book to display the condition setting screen.
The administrator setting can be used to set the display to show either the condition setting screen or the Address book screen when the
[IMAGE SEND] key is pressed.
A. Condition settings screen
Base screen of scan mode
1
READY TO SEND
.
AUTO
16
EXPOSURE
300 x 300dpi
15
RESOLUTION
PDF MMR(G4)
14
FILE FORMAT
AUTO
13
ORIGINAL
12
No. Name
1 Message display
2 [ ] (Quick) key
3 [MODE SWITCH] key
4 [RESEND] key
5 [ADDRESS BOOK] key
6 [ADDRESS REVIEW] key When performing a broadcast transmission, touch this key to check your selected destinations. Your
7 [SPECIAL MODES] key
8 [FILE] key
9 [QUICK FILE] key
10 [SEND SETTINGS] key
11 [ADDRESS ENTRY] key
12 Two-sided scanning icon
display
13 [ORIGINAL] key
14 [FILE FORMAT] key
15 [RESOLUTION] key
16 [EXPOSURE] key
MX-M350/M450 N/U EXTERNAL VIEWS AND INTERNAL STRUCTURES 5 - 5
2 3 4
RESEND
SCAN
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
FILE
ADDRESS ENTRY
SEND SETTINGS QUICK FILE
11 10
Messages appear here to indicate the current status of the machine.
When the machine is ready to send, an icon appears to the left.
When you add a one-touch key or a group key, the machine will automatically assign a shortened number.
Use this key for a three-digit shortened number to simplify the transmission procedure.
Touch this to change the image send mode.
The modes that can be selected will vary depending on the peripheral devices (network scanner expansion
kit, facsimile expansion kit, Internet fax expansion kit) that are installed.
When the application integration module is installed, the [DATA ENTRY] key appears below the [MODE
SWITCH] key.
Touch this key to resend to the last Scan to E-mail, Internet fax, or fax destination used.
Note that the following types of destinations are not retained for the resend function.
• A one-touch key in which multiple destinations are stored (group key).
• Scan to FTP, Scan to Desktop, and Scan to Network Folder addresses.
• Broadcasting addresses
After the resend address is entered, the key changes to the [NEXT ADDRESS] key.
This displays the Address Book screen. Touch this key when you wish to use a onetouch key that has a
destination (or group) programmed in it.
selected destinations will appear as a list, and the list can be edited.
Touch this key to set the special modes.
• Program • Erase
• Job build • Transaction report
Touch this key to store a document image that you are transmitting in the hard disk (this includes selecting
a user name, file name, and location).
Touch this key to store a document image that you are transmitting in the temporary storage folder.
Touch this key to set the subject, file name, and sender name.
When performing Scan to E-mail, touch this key if you wish to enter the e-mail address of the recipient
manually instead of using a one-touch key.
Icons appear here when you touch the [ORIGINAL] key and select two-sided scanning. The icons can be
touched to open function selection screens.
Touch this key when you wish to manually set the size of the original to be scanned or scan both sides of
the original.
Touch this key to set the file format of scan images that you transmit. The selected file format setting will be
highlighted above the key. The initial factory setting is "PDF MMR(G4)".
Touch this key to change the resolution setting for the original to be scanned. The selected resolution
setting will be highlighted above the key. The initial factory setting is "300x300dpi" (SCAN mode) or
"STANDARD" (INTERNET-FAX mode).
Touch this key to change the exposure setting for the original to be scanned. The selected exposure setting
will be highlighted above the key. The initial factory setting is "AUTO".
Base screen of Internet fax mode
1
READY TO SEND
.
5
AUTO
16
EXPOSURE
6
STANDARD
15
7 RESOLUTION
AUTO
8
13
ORIGINAL
9
12
Function/Operation
• Addresses used only for BCC delivery
• Dual page scan • Timer
2 3 4
RESEND
INTERNET-FAX
ADDRESS BOOK
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
ADDRESS ENTRY FILE
SEND SETTINGS QUICK FILE
11 10
• 2 in 1 • Card shot
5
6
7
8
9