Sharp MX-M350 Service Manual page 160

22-7
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to display the key operator code. (This
(Purpose) simulation is used when the customer forgets the
key operator code.)
Item Data
Operation/Procedure
The key operator code is displayed.
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
22-8
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to check the number of use of the finisher,
(Purpose) the SPF, and the scan (reading) unit.
Section Optical (Image scanning)
Item Counter
Operation/Procedure
The values of the finisher counter, the scanner (read), counter, and
the SPF related counters are displayed.
SPF Document feed quantity
SCAN Number of scans
STAPLER Number of stapling
PUNCH Number of punching
STAMP Number of SPF finish stamps
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN: ********
STAPLER: ******** PUNCH: ********
STAMP: ********
22-9
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to check the number of use (print quantity) of
(Purpose) each paper feed section.
Section Paper feed, ADU
Item Counter
Operation/Procedure
The values of the paper feed related counters are displayed.
TRAY1 Use quantity of tray 1
TRAY2 Use quantity of tray 2 (Multi purpose tray)
TRAY3/LCC1 Use quantity of tray 3/LCC left tray
(Common to Desk/LCC)
TRAY4/LCC2 Use quantity of tray 4/LCC right tray
BPT Use quantity of manual feed tray
ADU Use quantity of duplex paper feed
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ******** TRAY2:
TRAY3/LCC1:******** TRAY4/LCC2:********
BPT: ******** ADU:
User data
Finisher
********
********
MX-M350/M450 N/U SIMULATION 9 - 21
22-10
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to check the system configuration (option,
(Purpose) internal hardware).
Item Specifications
Operation/Procedure
The system configuration is displayed. (The model names of the
installed devices and options are displayed.)
MACHINE MX-M350U, MX-M450U/
MX-M350N, MX-M450N
SPF (Model code)
FINISHER NONE/ (Model code)
MAIL BIN NONE/ (Model code)
PUNCH NONE/ (Model code)
DESK/LCC NONE/ (Model code)
ADU NONE/ (Model code)
SYSTEM MEMORY Memory capacity (MB)
HDD Hard disk capacity (MB)
ICU Board type
NIC NONE/ (Model code)
NSCN NONE/ (Network scanner)
PS3 NONE/ (PS3 expansion kit)
FAX NONE/ (Model code)
FAX MEMORY FAX expansion memory capacity (MB)
HAND SET NONE/ (Model code)
STAMP Finisher stamp NONE/ (Model code)
PCU TYPE PCU PWB type (JPN: Japan/
EX100: EX Japan 100V/
EX200: EX Japan 200V)
(Model code list)
Item Display
MACHINE MX-M350U
MX-M450U
MX-M350N
MX-M450N
SPF ----
MX-EFX1
FINISHER ----
AR-FN6
AR-FN7
MAIL BIN ----
AR-MS1
Punch unit ----
AR-PN1A
AR-PN1B
AR-PN1C
AR-PN1D
ADU ----
AR-DU3
AR-DU4
DESK ----
AR-MU2
AR-D27
AR-D28
ICU TYPE-U/S
TYPE-U/FP For U/FP model board
TYPE-N
MEMORY 0MB
***MB
Options
Content
35-sheet U model (Local printer
standard provision model)
45-sheet U model (Local printer
standard provision model)
35-sheet N model
45-sheet N model
Document feed unit not installed
Duplex document feed unit
(DSPF) installed
After-work unit not installed
Built-in finisher installed
Console finisher installed
Mail bin not installed
Mail bin installed
Punch unit not installed
Punch unit 2 holes
Punch unit 3 holes
Punch unit 4 holes
Punch unit 4 holes wide hole
Duplex module not installed
Duplex module installed
Duplex module + manual feed unit
installed
Paper feed desk not installed
Multi-purpose tray installed
Paper feed desk installed
Tandem desk installed
For U/S model board
For N model board
No expansion memory
Expansion memory ***MB