Sharp MX-M350 Service Manual page 211

Engine
No Controller
pattern
58 All surface 1 by 5 (Vertical)
59 All surface 1 by 5 (Horizontal)
60 All surface 2 by 2 (Vertical)
61 All surface 2 by 2 (Horizontal)
62 All surface 2 by 3 (Vertical)
63 All surface 2 by 3 (Horizontal)
64 All background
65 Special pattern
66 For every other 1 block width
128 pixels/ 32 gradations
67 For every other 1 block width
128 pixels/ 16 gradations
68 For every other 1 block width
128 pixels/ 8 gradations
69 1-dot pattern
70 Print adjustment pattern with
scale (Vertical)
71 Grid pattern
72 Slant line 45 degrees
73 Slant line 26.6 degrees
74 Slant line 63.4 degrees
75 ID/BG pattern
76 Dot pattern 12.5%
77 Dot pattern 28%
78 Dot pattern 50%
79 All surface effort diffusion
background
80 All surface dither process
background
81 For every other 1 block width
128 pixels/ 32 gradations
82 For every other 1 block width
128 pixels/ 16 gradations
83 For every other 1 block width
128 pixels/ 8 gradations
84 Memory check pattern
85 Cleaning check pattern
86 Offset check pattern
87 Text pattern A
88 Text pattern B
89 Text pattern C
90 Toner quantity measuring chart
91 Radiation chart
98 Data printing
: Error diffusion process
Note*: Since the "DENSITY" of an actual copy or printer output
differs, they differ from the output of self print.
Pattern Note
Note *
Note *
Note *
MX-M350/M450 N/U SIMULATION 9 - 72
SIMULATION 64-1
SELF PRINT MODE. SELECT 0-7, AND PRESS START.
0. TRAY SELECT :1
2. PRINT PATTERN:87
4. MULTI : 1
6. LEVEL : 1
Select 1, and Select other than 1, and
press [START] key. press [START] key.
(2) SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 1-98.
SIMULATION 64-1
(3)
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(DENSITY)
1-255
(4) SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(MULTI COUNT)
1-999
SIMULATION 64-1
(5)
SELF PRINT MODE. SELECT 1-8, AND PRESS START.
(MODE)
1.STANDARD 2.SMOOTHING
5.SMOOTHING+ TONER SAVE
7.TONER SAVE+ HALF TONE
8.SMOOTHING+ TONER SAVE+ HALF TONE
(6) SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(LEVEL)
1-5
(0) SIMULATION 64-1
SELF PRINT MODE. SELECT 1-5, AND PRESS START.
(FEED TRAY)
1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
(7) SIMULATION 64-1
SELF PRINT MODE. SELECT 1-2, AND PRESS START.
(DUPLEX)
1.NO 2.YES
SIMULATION 64-1
SELFT PRINT MODE.. EXECUTING···
0. TRAY SELECT :1
2. PRINT PATTERN:87
4. MULTI : 1
6. LEVEL : 1
1. PRINT START
1
3. DENSITY :1
5. MODE :1
7. DUPLEX :1
Press [START] key, or
press [SYSTEM SETTINGS] key.
71
100
1
3.TONER SAVE 4.HALF TONE
6.SMOOTHING+ HALF TONE
1
3
1
5.BPT
1
3. DENSITY :1
0
5. MODE :1
7. DUPLEX :1