Sharp MX-M350 Service Manual page 165

1 COPY Copy effective paper counter
SIMULATION 24-6
COPY COUNTER DATA CLEAR. PRESS START.
1. COPY
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-6
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = COPY
24-7
Purpose Data clear
Function Used to clear the OPC drum counter. (Perform this
(Purpose) simulation when the OPC drum is replaced.)
Section Image process (Photoconductor/Developing/
Transfer/Cleaning)
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
After replacing the OPC drum, be sure to clear the OPC drum
counter.
1 DRUM
SIMULATION 24-7
DRUM COUNTER DATA CLEAR. SELECT1, AND PRESS
START.
1. DRUM
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-7
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = DRUM
24-9
Purpose Data clear
Function Used clear the printer mode print counter and the
(Purpose) self print mode print counter.
Section Printer
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
1
1
Photo conductor
OPC drum counter
1
1
MX-M350/M450 N/U SIMULATION 9 - 26
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
After replacing the OPC drum, be sure to clear the OPC drum
counter.
1 PRINTER Printer counter (Print mode)
2 OTHERS Other effective paper counter (Self print mode)
SIMULATION 24-9
PRINTER/OTHERS COUNTER DATA CLEAR. SELECT1-2, AND
PRESS START.
1. PRINTER
2. OTHERS
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-9
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = PRINTER, OTHERS
24-10
Purpose Data clear
Function Used to clear the FAX counter. (Only when FAX is
(Purpose) installed)
Section FAX
Item Counter
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
1 FAX SEND Number of times of FAX send
2 FAX RECEIVE Number of times of FAX receive
3 FAX OUTPUT FAX print quantity
4 SEND IMAGES Send quantity
5 SEND TIME Send time
6 RECEIVE TIME Receive time
SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME
Press [START] key. Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-10
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
* = FAX SEND, FAX RECEIVED, FAX OUTPUT, SEND IMAGES,
SEND TIME, RECEIVE TIME
1
1
1
1