Sharp MX-M350 Service Manual page 220

66-20
Purpose Data transfer
Function Used to read the back-up data by SIM 66-19 to the
(Purpose) SRAM/HDD. (Only when FAX is installed)
Section FAX
Item Data
Operation/Procedure
1) Select YES/NO of data transfer.
1 YES Backup is executed.
2 NO Backup is not executed.
2) Press [START] key.
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM)
ARE YOU SURE?
1. YES
2. NO
Press [START] key.
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...
After completion of read
66-21
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function Used to print information related to FAX (various
(Purpose) registrations, communication management, file
management, system error protocol). (Only when
FAX is installed)
Section FAX
Item Data
Operation/Procedure
1) Enter the number corresponding to the information (item) to be
printed with 10-key.
2) Press [START] key.
1 REGISTERED
2 MANAGEMENT
3 FILE MANAGEMENT
4 SYSTEM ERROR
5 PROTOCOL
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1. REGISTERED 2. MANAGEMENT
3. FILE MANAGEMENT 4. SYSTEM ERROR
5. PROTOCOL
Select other than 0 and
press [START] key.
If there is no print data,
the display returns to the
original state without printing.
(When 1)
SIMULATION 66-21
FAX INFORMATION PRINT OUT. EXECUTING···
1. REGISTERED
After completion of backup
1
1
Various registration information
Communication management
information
File management information
System error information
Protocol information
MX-M350/M450 N/U SIMULATION 9 - 81
66-22
Purpose Setting
Function Used to adjust the handset volume. (Only when
(Purpose) the FAX is installed.)
Section FAX
Item Operation
Operation/Procedure
1) Enter the number corresponding to the volume with 10-key.
2) Press [START] key.
1 MIN
2 MIDDLE
3 MAX
Selection of 1, 2, and 3 can be made during execution.
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
Press [START] key.
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
Same display Select 3 and press [START] key.
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
EXECUTING···.
1. MIN
2. MIDDLE
3. MAX
SIMULATION 66-22
HANDSET VOLUME SETTING SELECT 1-3, AND PRESS START.
1. MIN
2. MIDDLE
3. MAX
66-23
Purpose Setting
Function Used to download the FAX program. (Only when
(Purpose) FAX is installed)
Not used in the market. (For development)
Section FAX
Item
Operation/Procedure
1) Turn OFF the power.
2) Remove the protect pin.
3) Turn ON the power.
4) Enter the SIM 66-23 mode.
5) Press [START] key.
During operation, "EXECUTING" is displayed. When the operation
is completed normally, "COMPLETE" is displayed.
If an error occurs, "FAIL" is displayed.
6) Turn OFF the power, and attach the protect pin.
Small
Medium
Large
2
Press [SYSTEM SETTINGS] key.
2
3
Press [SYSTEM SETTINGS] key.
3