10 OPTIONS
10.1 COMMUNICATION OPTIONS
SGT5000_OPT_RMS_01
Stop
Alarm
g
Mute
Test
GE Digital Energy
10.2 BUILT IN UPS OPTIONS
Modifications reserved
OPM_SPE_XXX_60K_60K_7GB_V010.doc
Advanced SNMP Card
Simple Network Management Protocol
The Advanced SNMP Card is an interface to the Ethernet
Network, and provides UPS information via the standard
SNMP Protocol (UPS-MIB (RFC-1628); GE Single MIB; GE
Parallel MIB).
The UPS can therefore be managed by a Network
Management System (NMS) or by our applications (for
instance JUMP), which uses this information to determine
the state of the UPS in order to guarantee safe and orderly
shutdown of the server, when needed.
IRIS Service
Internet Remote Information System
Internet Remote Information System for UPS System
JUMP Software Suite
Java Universal Management Protocol
Software application for the control and monitoring of the UPS.
Remote Signalling Box (RSB)
Equipped with mimic diagram, general alarm, stop operation, alarm reset and
lamp.
RPA Kit
Redundant Parallel Architecture
Up to 8 units parallelable for redundancy or capacity in RPA configuration
Auxiliary Power Supply (APS) 24 VDC / 1A
Pagina 81/90
Operatine Manual SitePro 60 kVA