Options; Options General View - GE LP 33U Series Operating Manual

8

OPTIONS

8.1

OPTIONS GENERAL VIEW

Utility Input
g g g g g g g
Digital Energy Digital Energy Digital Energy Digital Energy Digital Energy Digital Energy Digital Energy
Battery System UPS System Battery System UPS System Battery System UPS System Battery System
Load
Modifications reserved
OPM_LPS_3UO_50K_60K_1US_V010.doc
RPA kit
g
Digital Energy
UPS System
Redundant Parallel Architecture
Allows extending the unit to a parallel system with 2, 3, or 4 units connected on the same
bus, which ensure the highest reliability rate and increase the power availability without
prior investments.
Additional battery cabinets
For battery with extended backup time (max. 16A).
Dimensions (WxDxH): 16.93" x 28.55" x 70.95" / 430 x 725 x 1802 mm
Customer Interface
The Customer Interface allows the client the exchange of information (monitoring and
control) with the following interfaces:
- Serial port RS232.
- 6 programmable output channels.
- 2 programmable input channels, of witch one for GEN-ON.
- EPO (Emergency Power Off).
Advanced SNMP Card
Simple Network Management Protocol
The Advanced SNMP Card is an Interface to the Ethernet Network, and provides UPS
information via the standard SNMP protocol.
The UPS can therefore be managed by a Network Management System (NMS) or by our
applications (for instance JUMP), which uses this information to determine the state of the
UPS in order to guarantee safe and orderly shutdown of the server, when needed.
GE Power Diagnostics
GE Power Diagnostics is an anytime, anywhere concept in UPS status monitoring and
alarm notification that has been successfully implemented in numerous of installations
supporting up to multi-hundred UPS.
Based on the leading Intelligent Remote Information System IRIS all GE UPS types as well as
3rd party UPS are supported.
Accessing the latest site information via Web and being alerted by Email, SMS or Fax, it
enables the user to make timely decisions in case of changing critical conditions.
With comprehensive data collection and analysis IRIS is not only a remote monitoring &
diagnostics (RM&D) system but, the core of the integrated service offering GE Power
Diagnostics.
GE Data Protection
GE Data Protection software can communicate with the UPS over RS-232, USB or SNMP to
receive status information and measurement values of the UPS.
In case of a critical condition (time on battery, remaining battery autonomy time or low
battery) for the load, the software starts a controlled shutdown.
An enhanced alarm management system provides the possibility to start applications,
send messages, and send e-mails for every upcoming or disappearing alarm.
Page 63/65
Operating Manual LP 33U Series 30 & 40 kVA