GE Digital Energy SitePro 400 VAC CESeries 7 Operating Manual page 51

3. Telephone numbers
Tel1 This parameter specifies a first telephone number to be used for modem dial-out.
The telephone number has a maximum 39 characters and cannot contain blanks.
If the desired number is shorter than 39 characters, the string will finish with blanks.
Tel1 enabled This parameter Y/N specifies if the first telephone number will be used for dial-out.
Tel2 A second dial-out number.
Tel2 enabled This parameter Y/N specifies if the second telephone number will be used for dial-out.
Tel3 A third dial-out number.
Tel3 enabled This parameter Y/N specifies if the third telephone number will be used for dial-out.
Tel4 A fourth dial-out number.
Tel4 enabled This parameter Y/N specifies if the fourth telephone number will be used for dial-out.
4. LCD Display
UPS Name The user can choose the name of the UPS model shown on the main page (max. 7
characters).
LCD Contrast This parameter controls the contrast of the LCD screen in ten steps.
It can be adapted depending on the room lighting.
LCD Language This parameter allows the choice of language used to display the information.
Valid choices are English, German, Italian, Spanish, French, Finnish, Tschech, Slovak,
Polish and Portuguese.
Modifications reserved
OPM_SPE_XXX_60K_60K_7GB_V010.doc
m e te rin g
Tel1 :
Tel1 en ab led : N
a la rm s
Tel2 :
Tel2 en ab led : N
p a ra m e te rs
m etering
LCD Display
UPS N AM E: SG Series
alarm s
Contrast = 9
Language = EN GLISH
param eters
+
–
o k
+
–
ok
Pagina 51/90
Operatine Manual SitePro 60 kVA