Table of Contents
Advertisement
8 OPTIONS
8.1 COMMUNICATION OPTIONS
SGT5000_OPT_RMS_01
Stop
Alarm
g
Mute
Test
GE Digital Energy
8.2
OPTIONS IN UPS CABINET
Modifications reserved
OPM_SGS_USM_M40_M50_1US_V020.doc
Advanced SNMP Card
Simple Network Management Protocol
The Advanced SNMP Card is an interface to the Ethernet Network,
and provides UPS information via the standard SNMP Protocol
(UPS-MIB (RFC-1628); GE Single MIB; GE Parallel MIB).
The UPS can therefore be managed by a Network Management
System (NMS) or by our applications (for instance JUMP), which
uses this information to determine the state of the UPS in order to
guarantee safe and orderly shutdown of the server, when
needed.
IRIS Service
Internet Remote Information System
Internet Remote Information System for UPS System.
JUMP Software Suite
Java Universal Management Protocol
Software application for the control and monitoring of the UPS.
Remote Signalling Box (RSB)
Equipped with mimic diagram, general alarm, stop operation,
alarm reset and lamp.
RPA Kit
Redundant Parallel Architecture
Up to 8 units parallel possible for redundancy or capacity in RPA
configuration.
5
harmonic filter
th
Located inside UPS cabinet.
5
and 11
harmonic filter
th
th
Located inside UPS cabinet.
3-wire kit
Located inside UPS cabinet.
To connect the UPS a 3-wire mains input.
FCC Filter
Located inside UPS cabinet. Meets FCC Class A, Part 15
Standard for EMI suppression.
Page 82/86
Operating Manual SG Series 400 & 500 kVA
Hide quick links:
Advertisement
Table of Contents
