Edit Mode - GE Digital Energy SitePro 400 VAC CESeries 7 Operating Manual

7.4

EDIT MODE

The Edit mode is entered from the Parameters mode when the ok button is pressed.
During this mode the LCD will display a special editing screen for the parameter being edited.
The screen contents during Edit mode is:
•
On the first line of the screen it is clearly indicated the special operating mode.
•
On the second line you will find the name of the parameter being edited.
•
On the third line is displayed the current value of the parameter.
•
The fourth line contains a condensed help text.
During the Edit mode the buttons perform the following functions:
metering exits Edit mode and enters Metering mode; any changes are discarded.
alarms exits Edit mode and enters Alarms mode; any changes are discarded.
parameters exits Edit mode and enters Parameters mode; any changes are discarded.
+ scroll from editable position to editable position.
– change the currently selected editable position.
ok return to Parameters mode after saving the changes.
Examples of operation during Edit mode
There are three types of parameters they differ in behavior during Edit mode.
Depending the type of parameters, there are different ways to select and to change the needed values.
Type 1: Parameters having a large range of values (numeric value).
As continuation of the previous example, the telephone number stored in "Tel2" must be changed:
1 – Move the selection (block cursor) to the next character.
1
2 – Move the selection to the next character (+).
2
Modifications reserved
OPM_SPE_XXX_60K_60K_7GB_V010.doc
metering
EDIT MODE
PHONE NUMBER 2
alarms
004017464340
+ SCROLL - CHANGE
parameters
metering
EDIT MODE
PHONE NUMBER 2
alarms
004017464340
+ SCROLL - CHANGE
parameters
+
–
ok
+
–
ok
Pagina 47/90
Operatine Manual SitePro 60 kVA