Introduction - GE Digital Energy SitePro 400 VAC CESeries 7 Operating Manual

2

INTRODUCTION

An Uninterruptible Power Supply (UPS) provides the power for critical loads that need a reliable,
continuous, disturbance free supply.
In case the power provided by the Mains Fails, or exceeds the permitted tolerances, the power to supply
the Load is provided by the Battery for the specified time at the rated Load (or longer at a reduced Load)
or until the Mains power returns.
SitePro is a true double conversion VFI (Voltage Frequency Independent) UPS system where the Load is
continuously supplied by the Inverter through the Rectifier.
SitePro can be configured, if chosen, for the SEM mode (Super Eco Mode) permitting maximum energy
saving.
If the Inverter is not able to supply the required Output Voltage, or when overload or short-circuit on the
output occur, the Load is instantly transferred to the Mains via the Automatic Bypass.
The UPS automatically returns to normal mode when the failure condition is restored.
Key features:
More Critical equipment supported
Rated at 0.9 Power Factor, SitePro delivers more real power than other UPS in the market.
With today's trend toward power factor corrected loads, SitePro can support more total Load than any
other UPS available, allowing you to support a greater number of today's enterprise computing Power
Factor Corrected (PFC) equipment.
No single point of failure
Redundant Parallel Architecture (RPA) is an exclusive GE technology.
With RPA, SitePro UPS are controlled in a true peer-to-peer configuration where all critical elements and
functions (including Bypass) are redundant.
SitePro is designed to be the most reliable power protection system available on the market today.
High Efficiency
Using IGBT technology and Space Vector Modulation (SVM) strategy, SitePro offers low output voltage
distortion and provides efficiencies up to 93%.
Fully digital
Digital Signal Processor (DSP), Flash memory and SVM strategy are the technology corner stones of a
new age of power quality and power reliability.
Extremely flexible
Tailor made power protection to meet your individual installation requirements; SitePro offers various
options like input harmonic filters and our comprehensive JUMP software suite for mission control and
data protection to cover all your application needs.
Modifications reserved Pagina 10/90
OPM_SPE_XXX_60K_60K_7GB_V010.doc Operatine Manual SitePro 60 kVA