Suspend Mode; The Hx2; Off Mode - Honeywell HX2 Reference Manual

Suspend Mode

The HX2

The Suspend mode is entered when the unit is inactive for a predetermined period of time or the user taps the Power key.
HX2 Suspend timers are set using Start > Settings > Control Panel > Power > Schemes tab.
Wake up Events - all configurable via a Power Management API call:
Any key on the keypad
l
Stylus touch on the touch screen
l
Scan button on ring scanner pressed
l
Docked in a powered desktop cradle
l
Power button tap
l
When the unit wakes up, the Display Backlight and the Power Off timers begin the countdown again. When any one of the
above events occurs prior to the Power Off timer expiring, the timer starts the countdown again.
The HX2 should be placed in Suspend Mode before hotswapping the main battery.
Hotswapping the Ring Scanner does not require placing the HX2 in Suspend Mode.

Off Mode

The unit is in Off Mode when the tethered battery and the backup battery are depleted. Connect a fully charged main battery
and press the Power key to turn the HX2 On.
3-2