Verify Installation - Honeywell HX2 Reference Manual

Using the explorer buttons, browse to the location where you copied the private key file, change the Type pull down list to
Private Keys, select the certificate desired and tap OK. Enter the password for the certificate if appropriate.

Verify Installation

Tap on View to see the certificate details again.
The private key should now say present. If it does not, there is a problem. Possible items to check:
Make sure the certificate was generated with a separate private key file, as shown earlier in this section. If the
l
certificate was not generated with a separate private key file, generate a new certificate and follow the import process
again.
Make sure the certificate and private key file have the same name, for example USER.CER for the certificate and
l
USER.PVK for the private key file. If the file names are not the same, rename the private key file and import it again.
6-55