Turn Power On; Suspend Mode (Sleep Mode); Use Hibernate Mode For Battery Removal - Honeywell CN75 Quick Start Manual

Turn Power On

The computer automatically turns on when you install the
battery pack.

Suspend Mode (Sleep Mode)

Suspend mode automatically turns off all radios and internal
devices not involved in saving the system state to save battery
power when the computer is inactive for a programmed period
of time.
• Press and release the Power button to wake the computer.
To manually activate suspend mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Suspend.
Note: To adjust the time out limit, touch Settings > Power. Select
the Advanced tab.

Use Hibernate Mode for Battery Removal

You should always place the computer in hibernate mode before
removing the battery. Hibernate mode places the computer in a
low power state so that the battery can be removed for a short
period of time.
To activate hibernate mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Hibernate.
3. After replacing the battery, press and release the Power
button to wake the device.
10