Hx2 Pushes File To Remote Device; Lxez Pairing And External Application - Honeywell HX2 Reference Manual

Notifications enabled, HX2 is not Write Capable
1. The OPP client initiates a connection to the HX2 by selecting a file to push to the HX2.
2. The file is rejected silently (no notification to the HX2 user).
Notifications disabled, HX2 is Write Capable
1. The OPP client initiates a connection to the HX2 by selecting a file to push to the HX2.
2. The file is accepted silently (no notification to the HX2 user).
Notifications disabled, HX2 is not Write Capable
1. The OPP client initiates a connection to the HX2 by selecting a file to push to the HX2.
2. The file is rejected silently (no notification to the HX2 user).

HX2 Pushes File to Remote Device

This section assumes that a device supporting OPP is paired with the HX2.
The HX2 (OPP client) initiates a connection to the remote device (OPP server) by selecting a file to push to the remote device.
The HX2 sends the file and disconnects. The remote device may prompt the user (of that remote device) to accept the
incoming request depending on the security settings of the remote device. The prompt may be displayed more than once, or it
may not be displayed at all.
Notifications enabled
The file is pushed to the remote device and the user of the HX2 is notified of the completion of the push.
Notifications disabled
The file is pushed to the remote device and the user of the HX2 is not notified of the completion of the push.

LXEZ Pairing and External Application

Because only one application can use the OPP service at a time, external applications that wish to use OPP should disable
LXEZ Pairing OPP before using the OPP service and restore LXEZ Pairing OPP upon completion using available API calls
(see the CE API Programming Guide for details). These API calls are the equivalent of checking or unchecking the
LXEZ Pairing OPP checkbox.
If Disable LXEZ Pairing OPP is not checked, checking it causes LXEZ Pairing OPP to be disabled and the send and
l
receive functionality is disabled.
If Disable LXEZ Pairing OPP is checked, and no application has registered a callback, un-checking LXEZ Pairing OPP
l
enables OPP functionality in LXEZ Pairing, and the send and receive functionality is enabled.
If Disable LXEZ Pairing OPP is checked, and another application has registered a callback, un-checking Disable LXEZ
l
Pairing OPP issues a dialog box which says "Another application is using OPP. Do you wish to force their
disconnection? Doing so will force the other application to be unregistered." The application that has been forcibly
unregistered receives a FORCED_UNREGISTER_RECEIVED event.
4-84
Disable