Using Bluetooth; Bluetooth Devices Display - Before Discovering Devices; Initial Configuration - Honeywell HX2 Reference Manual

Using Bluetooth

Start > Settings > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
or
The HX2 default Bluetooth setting is Enabled.
®
The HX2 Bluetooth module is designed to Discover and pair with nearby Bluetooth devices.
Prerequisite: The Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/Paired". The System
Administrator is familiar with the pairing function of the Bluetooth devices.

Bluetooth Devices Display - Before Discovering Devices

Initial Configuration

1. Select Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth HX2 default name is
determined by the factory installed software version. Assign a unique name (up to 32 characters) to every HX2 before
initiating Bluetooth Discovery.
4. Check or uncheck the HX2 Bluetooth options on the Settings and Reconnect tabs.
5. Tap the OK button to save your changes or the X button to discard any changes.
Bluetooth taskbar icon
4-77