Remap A Button Function; Virtual Keyboard; Using The Virtual Keyboard; Turning Power On/Off - Honeywell dolphin 75e User Manual

Hide thumbs Also See for dolphin 75e:
Table of Contents

Advertisement

Button
Right & Left
Side
Volume

Remap a Button Function

You can change the default function of the Scan, Left and Right side buttons.
1. Touch All Apps
2. Select the button to remap (i.e., LeftScan, RightScan, BottomScan).
3. Touch KEYS or APPS to view the available functions.
4. Select the function you want assigned to the button.
5. Touch
to return to the Settings screen.
If you want to remove the custom settings and return the buttons to their default functions, select Clear All Key Remap.
For information on the button locations on the terminal, see

Virtual Keyboard

The virtual keyboard appears when you open an application or select a field that requires text or numerical input. The content of
the keyboard may vary depending on the application in use and the input field requirements.

Using the Virtual Keyboard

During text input, you may need to switch between keyboard modes to access additional character sets (e.g., function keys,
symbols, and numbers). Each keyboard mode, includes navigation keys, which allow you to quickly switch between modes.
Touch the ABC key to switch to the Qwerty Mode, and the ?123 key to switch to the Numeric Mode. Touch and hold the
comma "," key to access the settings for input options or the period "." key to access additional symbols (e.g., @, %, +, &).
See
Language & input
Note: The content of the keyboard and the mode initially displayed may vary depending on the application in use and the
input field requirements.

Turning Power On/Off

To turn the terminal On, press and release the Power button
To turn the terminal Off:
1. Press and hold the Power button
2. Touch Power Off.
You should always power off the terminal before removing the battery. For information on removing the battery, see
the
Battery.

Turning Sleep Mode (Suspend Mode) On/Off

Sleep mode automatically turns the touch panel display off and locks the terminal to save battery power when the terminal is
inactive for a programmed period of time.
1. Press and release the Power button
Function
Trigger the scanner/imager.
Raise or lower the volume of the active speaker.
> Settings
> Key remap.
on page
5-6
for additional information on configuring keyboard & input methods.
until the options menu displays.
to wake the terminal.
Features of the Dolphin 75e
.
on page 2-3.
Replacing
1 - 9

Advertisement

Table of Contents
loading

Table of Contents