System Status Leds - Honeywell HX2 Reference Manual

System Status LEDs

When multiple system status conditions are present, the most urgent condition is indicated. The conditions listed below are in
increasing order of urgency by LED type.
LED
System Status
Bluetooth
Alpha
1-12
Color - Activity
Green - Blinking
Red - Steady
Red - Blinking
Off
Blue - Blinking Slowly
Blue – Blinking Medium
Blue - Blinking Fast
Off
Amber - Steady
Indicates ...
Display turned off when timer expires. This will help to conserve bat-
tery power. Tap the screen or press any key (except the Power but-
ton) to turn the display on again. The HX2 is not in Suspend Mode.
Main Battery Low. If the main battery is not replaced with a fully
charged battery before the main battery fails, the HX2 is turned Off.
Main Battery Power Fail
Suspend Mode
Bluetooth is active but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering nearby Bluetooth devices.
Bluetooth hardware has been turned off or does not exist in the HX2.
Amber mode enabled (Alpha key not used with Dual Alpha keypad
and the Triple Tap keypad.)