Rename The Computer And View File History; Rename, Share, Or Unpair A Paired Device - Honeywell ScanPal EDA51 Series User Manual

4. Tap Pair a new device
5. Select a device on the list to initiate a pairing request.
6. When the pairing request message appears:
7. (Optional) Once paired to a device, you can connect manually to the device. Tap

Rename the Computer and View File History

You can change the name of the computer to make it easier to identify when
pairing with other Bluetooth enabled devices and view statistics about received
files.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Device Name. Type the new name and then select Rename.

Rename, Share, or Unpair a Paired Device

You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:
EDA51 User Guide
appears.
• Verify the pairing PIN is the same on both device, and then tap Pair.
OR
• If the pairing request requires a PIN, enter the PIN, and then tap Pair.
the device under Previously Connected Devices. The device shows under
"Currently Connected" .
To disconnect a paired device, tap
then tap Forget.
> Connected devices > Connection preferences > Bluetooth.
> Connected devices > Bluetooth.
next to the paired device.
• To rename the device, select the edit icon
tap RENAME.
• To allow Internet connection sharing or Contact Sharing, tap on/off toggle
button next to the setting.
• To unpair the device, tap Forget.
. A list of available Bluetooth devices in range
next to the name of the paired device and
. Type the new name, and then
67