Fax Reception From A Bbs - ZyXEL Communications U-336S User Manual

Fax Reception from a BBS

The U-336S can automatically detect data and fax calls and allow
BBS software to receive faxes on the same phone line. To allow
your BBS to receive incoming faxes, make the following set-up
changes in your BBS:
1. Add the string #B1+FCLASS=6 to the init string. Be sure the
+FCLASS=6 command is the last command.
2. Change one of the messages in the list to CONNECT FAX.
3. Set the external mail string to ZyXEL and give it an error level.
4. In your BBS batch file, if the error level matches the external
mail, execute
rcvfax 2 /p:comport [/w:workpath]
This setting will enable the BBS to receive a fax and store it
automatically.
The following is a sample setting for the Front Door system.
• Add these commands to the init string:
X7#B1+FCLASS=6
• Change the connection message to:
• Set external mail as:
84 Fax Operation
300 CONNECT
1200 CONNECT 1200
1275 CONNECT FAX
2400 CONNECT 2400
4800 CONNECT 4800
9600 CONNECT 7200
19200 CONNECT 9600
38400 CONNECT 14400