ZyXEL Communications AAM1008-61 Release Note
ZyXEL Communications AAM1008-61 Release Note

ZyXEL Communications AAM1008-61 Release Note

V2.05(dn.2)c0

Advertisement

ZyXEL AAM1008-61 V2.05(DN.2)C0
Release Note/Manual Supplement
Date: May 24, 2005
This document describes the features in the AAM1008-61 product for its V2.05(DN.2)C0
release.
Version:
F/W Version: V2.05(DN.2)C0 | 05/24/2005
Firmware-related Information:
F/W Version
Bootcode Version
Modem Code Version
Image File Checksum
Init File Checksum
Bin File Checksum
SNMP SYS OID
Features:
1. 10/100 Mbps auto-sensing Ethernet port.
2. Support IEEE 802.1D transparent bridge.
3. ADSL ports support RFC 1483 Bridge Mode.
4. Support port-based VLAN.
5. Firmware upgrade and configuration backup/restore.
6. Telnet manageable.
7. SNMP manageable.
8. Web GUI management interface.
9. IGMP snooping.
10. IEEE 802.1Q tagging for subscriber identification.
11. Per port MAC filtering to filter out un-allowed packets.
12. UNIX syslog mechanism to log ADSL link on/down events to remote server.
13. System error log mechanism to log system events locally.
14. Secured access hosts protection.
15. MAC count filtering.
16. Multiple PVC & ATM QoS.
17. DHCP Relay with option 82.
18. IEEE 802.1X - Port-Based Network Access Control
Known Issue:
1. The behavior for MIB ipRouteTable (1.3.6.1.2.1.4.21) is incorrect.
2. When one sets the IP address and net mask with CLI or web interface, the validity for them is not
checked.
3. When a MAC Filter address 0:0:0:0:0:0 is set, one can't get it from the web interface.
V2.05(DN.2)C0 | 05/24/2005
V1.0
AC5 AnnexA 3.70 patch
8228
9d66
eebf
1.3.6.1.4.1.890.1.5.11.6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AAM1008-61 and is the answer not in the manual?

Questions and answers

Summary of Contents for ZyXEL Communications AAM1008-61

  • Page 1 ZyXEL AAM1008-61 V2.05(DN.2)C0 Release Note/Manual Supplement Date: May 24, 2005 This document describes the features in the AAM1008-61 product for its V2.05(DN.2)C0 release. Version: F/W Version: V2.05(DN.2)C0 | 05/24/2005 Firmware-related Information: F/W Version Bootcode Version Modem Code Version Image File Checksum...
  • Page 2: Change History

    10. 802.1X constraint: EAPOL frames transmitted by a PAE shall not be VLAN tagged according to IEEE 802.1X standard. The 802.1X implementation of AAM1008-61 doesn’t support priority-tagging EAPOL frames also. b. The PAE must associate itself with the super channel in a port.
  • Page 3 Zyxel-AS.mib support for adsl line configuration operation (1.3.6.1.4.1.890.1.5.1.1.16) Zyxel-AS.mib support for the configuration of packet forwarding (1.3.6.1.4.1.890.1.5.1.1.20) Zyxel.mib support for the configuration of virtual channel & vc profile (1.3.6.1.4.1.890.1.5.14) Add DHCP relay default configuration to ROM file V2.04(DN.2)C0 (10/30/2003) This firmware is modified from V2.04(DN.1)C0...
  • Page 4: Firmware Upgrade

    (the file with “img” extension name) from the ZyXEL web site and store it on your computer. You can use any FTP client (for example, ftp.exe in Windows) to upgrade AAM1008-61 firmware. The upgrade procedure is as follows: On management station: C:\>...
  • Page 5 4. Run BootpTftp.exe, you will see the following window.
  • Page 6 5. Click the “New” button to create a MAC address entry. The “Input Box” will pop up.
  • Page 7 6. Input MAC address of AAM1008-61 and then click “OK”. (You can find the MAC address of AAM1008-61 on console when booting AAM1008-61.)
  • Page 8 7. Set up host address (the IP address you want to assign to AAM1008-61), server address (the IP address of this PC), net mask, gateway and filename (the new firmware name). And then click “Update Database”.
  • Page 9 8. Choose “Normal Bootp” to enable normal BOOTP/TFTP function.
  • Page 10: Configuration Backup/Restore

    9. Power on AAM1008-61 and press any key within 3 seconds as indicated by the following figure. 10. Type “atnb” and then press Enter key on console window. 11. Wait for the firmware uploading to complete. 12. Use the following commands on AAM1008-61 to write the new firmware to flash memory.

Table of Contents