Storing A Number - ZyXEL Communications U-336S User Manual

AT&Z?
ATDSn
The first stored number shown on the menu is the default dial
number which can be selected from the DEFAULT DIAL menu. By
pressing the left or right arrow key, you can view up to 50 different
numbers stored in the memory. Pressing the ENTER key will cause
the selected number to be dialed. The first line of the LCD can
display up to 16 characters. However, up to 25 characters can be
entered. Characters 17 through 25 are displayed on the second line
of the LCD display.

Storing a Number

Pressing the right arrow key from the DIAL MEMORY display will
move the menu to STORE NUMBER. Pressing the ENTER key at
this point will produce the following screen display:
z #00: 12345
<< >> SELECT MEMORY
Changing an existing number:
z #00:1234567
<< >> SELECT MEMORY
Equivalent AT Commands:
AT&Z?
AT&Zn=1234567 Store phone number in memory location n (n=0-
Up to 50 different numbers can be viewed and set. If you want to
add a number to the memory, select an unused memory location
and press ENTER. The blinking cursor will change into an
View all stored phone numbers.
n = 0 - 49; dial stored number.
<ENTER> z #00:
<ENTER> z #00:
View all stored phone numbers.
49).
<< >> SELECT DIGIT
<< >> SELECT DIGIT
LCD Panel Operation 31