ZyXEL Communications U-336S User Manual page 81

Command
+FMDL?
+FMFR?
+FMINSP=n
+FPHCTO=
<value>
+FPTS=n
+FREL=n
+FREV?
Value Description
n=1 Indicate a document available for
polling.
Request DCE model .
Request DCE manufacturer .
Minimum phase C speed parameter:
n=0 2400 bps.
n=1 4800 bps.
n=2 7200 bps.
n=3 9600 bps.
n=4 12000 bps.
n=5 14400 bps.
0-255 DTE Phase C response time-out:
Determine how long the DCE will wait
for a command after reaching the end
of data when transmitting in Phase C.
<value>=0 to 255; 100 ms units.
Page transfer status
n=1 Received page good.
n=2 Page bad; retrain requested.
n=3 Page good; retrain requested.
n=4 Page bad; procedure interrupt
requested.
n=5 Page good; procedure interrupt
requested.
Phase C received EOL alignment:
n=0 The EOL patterns are bit aligned as
received.
n=1 The last received bits of EOL patterns
are byte aligned by the DCE, with
necessary zero fill bits inserted. Refer
to TIA PN-2388 for details.
Request the DCE revision
Fax Operation 69