ZyXEL Communications U-336S User Manual page 84

Supported Commands
Command
+FAA=n
+FBO=n
+FBS?
+FCC=vr,br,wd,
ln,df,ec,bf,st
+FCLASS=n
+FCO
+FCQ=<rq>,<t
q>
72 Fax Operation
Value Description
Auto-answer mode parameter:
n=0 DCE answers as set by +FCLASS.
n=1 DCE answers and auto-determines call
type.
Phase C data bit order:
n=0 Select direct bit order.
n=1 Select reversed bit order in receiving
mode for phase C data.
Buffer size parameter; read only.
DCE capability parameter. Refer to
+FDCC command in Class 2 for
parameter settings.
Service class selection. Refer to
+FCLASS Class 1 command in previous
section.
DCE response fax connection made.
Copy quality check capability parameter
rq=0 DCE Receive Copy Quality Checking
disabled.
rq=1 DCE Receive Copy Quality Checking
enabled.
rq=2 DCE Receive Copy Quality Correction
enabled.
tq=0 DCE Transmit Copy Quality Checking
disabled.
tq=1 DCE Transmit Copy Quality Checking
enabled.
tq=2 DCE Transmit Copy Quality Correction
enabled.