Response
+FNSC:"HEX string"
+FNSF:"HEX string"
+FNSS:"HEX string"
+FPOLL
+FPTS:n
+FTSI:"string"
+FVOICE
Class 2 Flow Control
Flow control is necessary to match the DTE-DCE data rate to the
line signaling rate while transmitting or receiving Group 3 (T.4)
data. In Class 2 fax mode, both hardware (RTS/CTS) and software
(XON/XOFF) flow control are enabled.
Class 2.0 Command Set
Command Syntax
+<command>=<value>
+<command>=?
+<command>?
Value Function and Description
n=70
Receive error on phase B hang up
code.
n=90
Receive error on phase C hang up
code.
n=100 Receive error on phase D hang up
code.
Report the non-standard facilities
command frame.
Report the non-standard facilities frame
response.
Report the non-standard setup frame
response.
Remote polling indication.
Receive page transfer status response;
refer to +FPTS=n command.
Report remote ID response TSI.
Transition to Voice response.
Description
Execute a command or set a
parameter.
Read permissible settings.
Read the current setting.
Fax Operation 71