Setup For Dos Fax/Modem Software - ZyXEL Communications Comet 3356 User Manual

assigns an IP when you log in (Dynamic IP), then leave the Server assigned IP
address option button checked. Most servers assign an IP to you when you log in.
8. Click the Specify name server addresses option button and enter your primary and
secondary DNS (Domain Name Server) IP.
In most cases, you should leave Use IP header compression and Use default remote
gateway checked. When all of the selections have been made, click the OK buttons
on all three opened dialog boxes.
This completes the remote connection definition. Locate the new connection icon in your
Dial-up Networking folder, and double click on it.
If the User name and Password are incorrect or missing, type them in. Click on the
Connect button and your Comet will dial the number and establish a connection to your
Internet Service Provider.

Setup for DOS Fax/Modem Software

After installing the Comet, use the following procedures to verify your modem
connections.
1. Install and load your communications software. If you need assistance, refer to the
manual that came with the software.
2. Select the following communication settings:
10 Installation