Syntax Command with
CRS
PRN
RLN
DIC
CIC
CFI
INC
VAL
INV
LSN
RST
Clock Options
Synchronous data must be transmitted and received with a common
timing clock. This timing clock is used to transmit data from the
DTE to the modem which modulates the data according to this
clock. The receiving modem recovers the clock and data from the
carrier and sends the data to the receiving DTE along with the
clock. There are three types of transmission synchronous clock
sources to choose from:
Parameters*
CRS n
PRN n;
<number>
RLN***
DIC
CIC
CFI XX
INC
VAL
INV
LSN n;
<number>
RST
Description
Call request with number from
memory, 0 # n # 49;
n is the memory location.
Saves <number> to address n
(0 # n #49).
Requests list of all stored numbers.
Ignores incoming call.
Accepts incoming call.
Call failure indication:
ET
Engaged Tone.
NS
Number is not stored.
RT
RING Tone.
AB
Abort Call.
NT
Answer Tone is not detected.
Incoming call.
Valid.
Invalid.
List of stored numbers.
(Response to RLN)
Changes to the asynchronous
AT command mode.
LCD Panel Operation 39