ZyXEL Communications U-336S User Manual page 92

Command
#B2
#B3
Parameter Setting
Command
#V0
#V1
#T0
#T1
#R0
#R1
#R2
#L0
#L1
#L2
#C0
#C1
#C2
80 Fax Operation
Function
page. The DTE software should detect the page
separator RTC and then sends the DC2 to receive
the next page of fax data. This mode is used with a
BBS receiving faxes.
This mode is for the polling feature of the modem.
In this mode, the modem will send a polling signal
to the remote fax device to ask to receive a fax from
the remote fax device. The received fax data will be
sent to the DTE continuously following the
connection message.
Displays the ring cadence.
Function
Set to normal vertical resolution.
Set to high vertical resolution.
Set to one dimensional coding scheme.
Set to two dimensional coding scheme.
Set recording width: 1728 picture elements along a
scan line length of 215 mm.
Set recording width: 2048 picture elements along a
scan line length of 255 mm.
Set recording width: 2432 picture elements along a
scan line length of 303 mm.
Set maximum recording length: A4 (297 mm ).
Set maximum recording length: B4 ( 364 mm ).
Set maximum recording length: unlimited.
Set minimum scan line time capability of the
receiver: 20 ms at 3.85 line/mm, T(7.7)=T(3.85).
Set minimum scan line time capability of the
receiver: 5 ms at 3.85 line/mm, T(7.7)=T(3.85).
Set minimum scan line time capability of the
receiver: 10 ms at 3.85 line/mm, T(7.7)=T(3.85).