ZyXEL Communications U-336S User Manual page 86

Command
+FKS
+FLI="string"
+FLO=n
+FLP=n
+FMI?
+FMM?
+FMR?
+FMS=n
+FNR=rpr,tpr,
idr,nsr
74 Fax Operation
Value Description
Session termination command.
Local ID string parameter.
Flow control options:
n=0 No flow control.
n=1 Set XON/XOFF software flow control.
n=2 Set CTS/RTS hardware flow control.
Document for polling command:
n=0 The DTE has no document for polling.
n=1 Indicated document available for
polling.
Request DCE manufacturer
identification.
Request DCE model identification.
Request DCE revision identification.
Minimum phase C speed parameter.
refer to +FMINSP Class 2 command in
previos section for parameter settings.
Negotiation message reporting control
parameters:
rpr=0 Receiver parameters are not reported.
+FIS: and +FTC: response reports are
suppressed.
rpr=1 Receiver parameters are reported. +FIS:
and +FTC: response reports are
generated.
tpr=0 Transmitter Parameters are not
reported. +FCS: response reports are
suppressed. (+FCS parameter is still
loaded)
tpr=1 Transmitter Parameters are reported.
+FCS: response reports are generated.
idr=0 ID Strings are not reported. +FTI: