Fax Reception From A Bbs - ZyXEL Communications U-336R/RE User Manual

Fax Reception from a BBS

Your modem can automatically detect data and fax calls and allow
BBS software to receive faxes on the same phone line. To allow
your BBS to receive incoming faxes, make the following set-up
changes in your BBS:
1. Add the string #B1+FCLASS=6 to the init string. Be sure the
2. Change one of the messages in the list to CONNECT FAX.
3. Set the external mail string to ZyXEL and give it an error level.
4. In your BBS batch file, if the error level matches the external
automatically.
The following is a sample setting for the Front Door system.
300
1200
1275
2400
String
+FCLASS=6 command is the last command.
mail, execute
rcvfax 2 /p:comport [/w:workpath]
This setting will enable the BBS to receive a fax and store it
Add these commands to the init string:
X7#B1+FCLASS=6
Change the connection message to:
CONNECT
CONNECT 1200
CONNECT FAX
CONNECT 2400
Set external mail as:
Error Level
4800 CONNECT 4800
9600 CONNECT 7200
19200 CONNECT 9600
38400 CONNECT
14400
Fax Operation 75