Security Screen; Security Menus; Installer Tools Menu; User Tools Menu - Honeywell L5200 Series Installation And Setup Manual

Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

LYNX Touch Installation and Setup Guide
Mechanics of Programming
Navigating Menus

Security Screen

System Status is displayed at the top of each screen and the time and date are displayed at the bottom of the
Security Screen. The Security menu Screens differ between the LYNX Touch L5200 and the L7000 versions.
Refer to the paragraphs below for additional information.
Security Menu
The Security Screen consists of two pages. The first page displays the system status and selection "icons"
and "tabs". The displayed pages and options may vary slightly depending upon the devices and services that
are installed in or connected to the system.
Selection
Zones
Provides access to Zone information and options.
System
Provides information about system status
Arm Away
Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay
Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Message
Provides access to Message Center.
Phone
Provides access to Speaker Phone mode. (if programmed L5200 only)
Delay/Instant
Used to toggle between exit delay and instant arming options
More
Advances system to second page of the Home Screen.
The second page also displays the system status and additional selection "icons" and "tabs".
Selection
Tools
Provides access to Installer and User Programming Menus (Master User Code required for access).
Arm Away
Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay
Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Settings
Provides access to various keypad functions (i.e.; Brightness, Contrast, Volume, Voice, Chime & Ringer).
Delay/Instant
Used to toggle between exit delay and instant arming options (displayed on both Home Screen pages).
Back
Returns system to first page of the Home Screen.

Installer Tools Menu

The Tools/Installer Menu provides access to the
Installer configurable features and displays six
options. Entering the Installer Code is required to
access the Installer Menu.
Note: For information regarding the Rules, Events and
Schedules programming screens, refer to the User
Manual.

User Tools Menu

The
User
Menu
provides
configurable features and displays eight options.
Entering the Master User Code is required to access
the User Menu.
access
to
the
User
- 22 -
Function
Function
System Programming...
Program
Rules
Initiate
Downloads
Installer Tools Menu Page
Ready To Arm
Users
Events
Date Time
Reminders
User Tools Menu Page
Test
Events
Schedules
5200-100-092-V0
Test
Keypad
Slide Show
WiFi Config
Back
5100-100-006-V0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l7000 series

Table of Contents