Update Server; Enroll The L5100-Wifi Module - Honeywell L5200 Series Installation And Setup Manual

Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

Update Server

This procedure is used to upload the Configuration File to the Server.
SCREEN
Comm. Diagnostics
Setup
Communication
During the upload process the following messages may be displayed:
Message
Updating Root File...
Programming Done
Updating Configuration – Try Later!
Cannot Upload – Try Later!
Update Root File – Failed!

Enroll the L5100-WiFi Module

The module can be enrolled using one of the following procedures:
Scan Access Points
Manual Configure Access Points
WPS
SCREEN
Comm. Diagnostics
1. Select "Comm. Diagnostics" The System displays the following options depending upon
the communication device that is installed:
WiFi Location
None
Use the down  arrow to scroll to the next page of options. Use the  arrow to return to
the previous page:
Communication
Status
2. Select "Setup Communication". The System advances to the Registration screen and
the following options are displayed:
Register
Device
Update
Server
3. Select "Update Server" and select "Yes" when the confirmation screen appears. The
device uploads its entire configuration file to the server. Selecting "No" will cancel the
operation. (Refer to the table below for applicable registration messages.)
The root file is being uploaded.
Indicates the root file has been successfully uploaded.
Error message indicates the module is busy
Error message indicates the communication path(s) is not available.
Error message indicates an error while uploading root file.
1. Select "Comm. Diagnostics" The System displays the following options depending upon
the communication device that is installed:
WiFi Location
None
Use the down  arrow to scroll to the next page of options. Use the  arrow to return to
the previous page:
Communication
Status
LYNX Touch Installation and Setup Guide
Programming the Control
ACTION
Configure
WiFi
Test
Communication
Register Device
With PIN
Factory
Defaults
Meaning
ACTION
Configure
WiFi
Test
Communication
- 55 -
Ethernet
Information
GSM
Information
Setup
Communication
Communication
ID Numbers
Ethernet
Information
GSM
Information
Setup
Communication
Communication
ID Numbers

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l7000 series

Table of Contents