Table of Contents
Advertisement
6
Service Functions
6.3
Save Settings
Access only with storage device defined as Default storage !
With the Save settings function the printer configuration can be saved to a storage device (USB flash drive,
Internal Flash File System). The configuration will be saved as XML file in the folder \MISC of the storage device. The
current date is used as file name YYYYMMDD.XML (e.g. 20110510.XML for a file saved on 05-10-2011).
1. If the printer configuration should be saved to an USB flash drive, select USB Memory as Default Storage
and insert USB flash drive into a USB master interface.
If the printer configuration should be saved on the Internal Flash File System, select IFFS as Default
Storage.
2. Start Offline menu.
3. Select Service.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm with OK.
4. Select Save settings.
5. Saving of the configuration data starts. When the entire saving procedure is complete the name of the created file
appears in the display.
6. Confirm with OK.
The printer returns to the Service menu.
An error message appearing during the saving procedure may be caused by an unreadable medium (e.g. unknown
medium, unformatted USB flash drive) "8.5.3" on page 40.
6.4
Default Settings
Access only with service key inserted!
With the Default settings function all setup parameters excepting the passwords page 20 can be reset to the
default values.
1. Insert service key into an USB master interface.
2. Start Offline menu.
3. Select the Service menu.
4. Select Default setting.
The display shows Set to factory defaults?.
5. Confirm with OK.
The setup parameters will be reset and printer returns to the Service menu.
33
Hide quick links:
Advertisement
Table of Contents
