Configuration; Configuration Via Control Panel - CAB EOS1 Configuration Manual

4

Configuration

4.1

Configuration via Control Panel

A host of parameters for configuring the printer are found in the Setup menu of the offline menu.
 Configure the printer via the control panel during initial commissioning and when making major changes to the
operational conditions.
 For changes required for processing different print jobs use software settings.
Notice!
i
The Setup menu can be protected from unauthorized access via a code number (PIN).
4.1.1 Local Settings
 Start Offline menu.
 Select Setup > Local settings.
Parameter
Language
Country
Timezone
Daylight saving
Date
Time
Keyboard
Table 2 Parameters of the menu Setup > Local settings
Meaning
Setting the display language
Setting the country-specific date and time formats.
The time formats can also be overwritten via software. The
changes are not saved permanently, however.
Adaptation of the time display of the printer to the time zone in
relation to UTC (Universal Time Coordinated).
Selection of the daylight saving regulation applicable for the
region. The time is then changed automatically.
Setting of the system date in the format DD.MM.YYYY.
The print output of the date occurs in the format set via the
Country parameter.
The date can also be changed via software. The change is not
saved permanently, however.
Setting the system time in the HH:MM:SS format. When
changing the time, ensure that the Timezone, Daylight
saving and Date parameters are set correctly.
The time can also be synchronized automatically via the internet
using the Ethernet interface. The print output of the time occurs
in the format set via the Country parameter.
The time can also be changed via software. The change is not
saved permanently, however.
Setting of the keyboard layout when using an external
keyboard.
If keyboard is not connected, access only with service
key inserted!
11
Default
English
Germany
UTC+1
EU
-
-
Germany